Lawn Tractor Tires – Sizing & Buying Guide
There are four primary considerations when replacing a lawn tractor tire: tire size, ply-rating, type of terrain and traction requirements, and, of course, price. The first step is to find the right replacement tire.
1. Lawn Tractor Tires Sizing
The first number before the “x” indicates the tire’s diameter when inflated and not under load; the second number before the “x” indicates the tire’s diameter when inflated and not under load. 15u00d76.00-6 is a common size.
3. Traction Needs
Turf tires, knobby all-terrain tires, and ribbed tires are the most common tread pattern types for lawn tractors, and if you are replacing one tire, you can usually find a tread pattern that is identical to the remaining tires.
4. Price
Small lawn tractor tires can be found for as little as $20 and as much as $60 or $70; regardless of the size, ply rating, or type of lawn tractor tire you require, Tires-easy.com has a variety of options at low prices.
What PSI should rear tractor tires be?
Dealers may overlook or fail to reduce tire pressures to the proper level for the load on the axle. New tractor tires are normally inflated to 30 psi when shipped from the factory to minimize bouncing on the trailer, but dealers may overlook or fail to reduce the pressure to the proper level for the load on the axle.
How do you read a lawn mower tire?
In the two-number system, the first number before the X is the tire’s diameter when inflated and not loaded, the middle number is the tire’s width, and the final number is the rim width; in the three-number system, the first number before the X is the tire’s diameter when inflated and not loaded, the middle number is the tire’s width, and the final number is the rim width.
What does tire size 20×10 8 mean?
The dimensions of the tire are represented by the numbers 20-10-8, where the first number is the height and the second number is the width.
What pressure should my tractor tires be?
Vandel calculates the recommended tire pressures, which are 20 psi in the front and 33 psi in the back, which are both lower than the actual tire pressures. u201cThe tires are overinflated by weight,u201d Vandel says.
How much air should be in my tractor tires?
The following are some general ballast recommendations: 2WD 25% front/75% rear, MFWH 35% front/65% rear, and 4WD 55% front/45% rear. Once the ballast is correct, the tire pressure can be checked and set. The correct tire pressure for the load and speed will be manufacturer specific, with each publishing charts with their recommendations.
What do numbers on lawn mower tires mean?
The three-number system for lawn tractor tires works a little differently: the first number before the “x” indicates the tire’s diameter when inflated and not under load, the middle number between the “x” and the “-,” indicates the tire’s width, and the final number indicates the rim’s width.
Can I put bigger tires on my riding mower?
Larger tires will provide additional clearance, though you may need to make adjustments to the deck and blades, and you may need to extend the axle to fit the new tires. We’ll also discuss the benefits and drawbacks of a larger tire.
What does NHS stand for on lawn mower tires?
All measurements are in inches, and the letters “NHS” after the tire size stand for “Non-Highway Service,” which means the tire is not designed to withstand highway speeds.
What tire sizes mean?
The aspect ratio is the two-digit number after the slash mark in a tire size; for example, the 65 in a size P215/65 R15 tire means that the height is equal to 65% of the width; the higher the aspect ratio, the larger the tire’s sidewall.
Will a 20x10x8 tire fit on an 20x8x8 rim?
Question: If I have a 20x8x8, will a 20x10x8 fit? Answer: A 20x8x8 requires a 6″ rim width, whereas a 20x10x8 requires an 8″ rim width.
What size air compressor do I need to inflate tractor tires?
Typical tractor tire pressures are around 20 PSI in the front and 33 PSI in the back, so those with valves will be inflated with an air compressor rated at around 4 CFM at 90 PSI.
Can you put air in a loaded tractor tire?
Air pressure is relative; it doesn’t matter if the tires have fluid in them or not; 20 psi in an empty tire is the same as 20 psi in a loaded tire.
How much air should I put in my semi truck tires?
On a 12,000-pound front axle, set STEER TIRE PRESSURE at 110 psi. SET DRIVE AND TRAILER TIRE PRESSURE within a broader allowable range; the legal load rating for those tires is only 75 psi; most truckers settle between 85 psi and 105 psi, with 95 psi being the most common.