Farmall H
The Farmall H was a medium-sized two-plow row crop tractor manufactured by International Harvester from 1939 to 1954, succeeding the Farmall F-20 and being followed by the Super H, 300, and 350, all of which were produced until 1963.
Description and production
The International Harvester H was the smaller of two popular row crop tractors produced by IH from the late 1930s to the early 1950s, with a top speed of 17 miles per hour (27 km/h) and no fifth gear on steel-wheeled tractors.
H variants
About 392,000 Hs were produced, with prices ranging from $850 to $1,650, with versions for gasoline, distillate, and kerosene fuels. Functional variants included the hiboy HV for high crops, which had a clearance of 30.25 inches (76.880cm).
Super H
The Farmall Super H was produced by International Harvester in 1953 and 1954, with a larger engine displacement of 164 cubic inches (2,690 cubic centimetres) and 32 horsepower (240kW). About 29,000 Super H tractors were produced.
Farmall 300
The Farmall 300 replaced the Super H in 1954 and was produced until 1956, with variations such as the IH 300 utility tractor and a 300 hiboy model, for a total of 29,077 units produced, plus an additional 170 high-clearance models.
Farmall 350
The Farmall 350 was an interim version of the Farmall 300 tractor, produced from 1956 to 1958. It was slightly restyled from the 300 and was replaced by the newly designed Farmall 340 in 1957.
Comparable products
The Oliver Super 66, Ford 960, and John Deere 60 have all been compared to the John Deere H tractor, as well as the Ford 300, Case 511B, Massey MF65, and Minneapolis-Moline 445.
References
Pripps, Robert N. (2020). The Complete Book of Farmall Tractors. Motor Books. ISBN00-7603-6389-8. Klancher, Lee (2017). The Farmall Dynasty (1.20ed.). Octane Press. p.108.
External links
On its website, Wikimedia Commons has Farmall H-related media from the National Transportation Safety Board (NTSB) and other sources.
How many cubic inches is a Farmall H?
When ordered or retrofitted, the H comes with a 4-cylinder in-line overhead valve with a 152-cubic-inch (2,490-cubic-centimetre) displacement and a 6-volt, positive ground electrical system with generator.
Can I put bigger tires on my tractor?
As you probably know, increasing the size of your tractor’s wheels and tyres will improve its performance: soil compaction will be reduced as a result of the larger surface area in contact with the ground, and there will be less slip as a result of the same.
How much can a Farmall H pull?
Farmalls with the letter “H” typically pull between 3500 and 4500 pounds.
What is a Farmall H worth?
First and foremost, this is an incredible selling price for a Farmall H tractor! There are still plenty of Farmall H tractors around u2013 hundreds of thousands were produced u2013 and you can usually get one for as little as $1,000 in Michigan.
What year is my Farmall H?
Look at the last letter in the series and multiply it by the number of that letter’s position in the alphabet (A = 1, B = 2, C = 3, and so on) to get 1930.
What is the difference between a Farmall H and Super H?
The brake drums on a plain H will be smooth steel pans, while the brake drums on a Super H will be cast iron with a steel button cap in the middle. A plain H will have a C-152 engine, which may or may not be cast into the engine block anywhere.
How do you size a tractor tire?
The first number represents the overall WIDTH of the tire when mounted and inflated to the proper air pressure, but it is measured in millimeters; divide this number by 25.4 to convert to inches, and this will become the second number for a traditional tractor tire size.
What PSI should tractor Tyres be?
Tyre selection should be based on the axle loads being carried and the level of ground pressure required, which will vary depending on the work being done and soil conditions. Tyres large enough to operate at pressures of 0.8 bar (12 psi) and below are now commonly used for cultivation and drilling work.
What do tractor TYRE sizes mean?
Using the same example, 16.9 R 30 or 480/70 R 30 or 18.4 R 34 or 460/85 R 34 corresponds to the height of the tyre sidewall. The figures 70 or 85 represent the series expressed in percent.
How many plows can a Farmall H pull?
In most cases, the H is a tractor with two plows.