Live PTO Explanation
A live PTO has a two-stage clutch, allowing you to stop, change gears, back up, and so on while the mower continues to receive power; a non-live PTO will stop receiving power every time the clutch pedal is depressed.
What is a non live PTO on a tractor?
Non-live ptos are driven by transmission gearing, and when you clutch or turn sharply with your tractor, the pto stops turning. Live ptos are driven directly from your engine to the PTO output shaft by a two-stage clutch.
Is Live PTO good?
When mowing, this is very useful because you can stop, change gears, back up, and so on while the mower is still receiving power, whereas if the PTO is not “live,” the mower will stop receiving power every time the clutch pedal is depressed.
When did Ford tractors have live PTO?
In 1959, Ford introduced independent live PTO in Select-O-Speed equipped tractors.
What are live hydraulics on a tractor?
Live hydraulics means that oil flow (power) is always available when the engine is running, which means that the hydraulic pump is driven directly from the engine, rather than through a clutch. Hydraulic pumps are typically mounted directly on the engine, in/on the gearbox on HST tractors, and on tractors with wet multiplate PTO clutches.
What is the difference between live PTO and independent PTO?
A live PTO uses a two-stage clutch, which allows the operator to change gears or slow down while the PTO is still running. Independent. An independent PTO uses a separate clutch to control the PTO shaft.
Do all tractors have PTO?
The information you’ve learned so far about PTO may have led you to believe that it’s only for certain types of tractors, or that it’s for all tractors. It’s natural to wonder if you’ll find PTO on every tractor you come across, and the answer is yes. Almost all modern tractors have PTO.
Does 8n have live PTO?
One disadvantage of the Ford N’s was that they were not live pto and live hydraulic, which meant that when you pushed the clutch in, the mower stopped mowing and, if it was raised, it dropped to the ground.
Does John Deere A have live PTO?
The live PTO on the John Deere Model 60 is independent of the tractor speed and is controlled by the tractor clutch pedal. If you press the clutch half way, the tractor stops moving but the PTO continues to run; if you press the clutch all the way, the tractor stops moving but the PTO stops as well.
What is a live continuous running PTO?
The tractor can be stopped to shift gears by depressing the foot pedal halfway down, but the pto will keep running until the pedal is fully depressed.
Does Ford 801 have live PTO?
Live PTO, three-point hitch, larger rear tires, heavy-duty front end, and power steering are also available, with the middle number of the tractor’s designation changing depending on the options chosen.
Does the Ford 9N tractor have a live PTO?
The lack of a “live” PTO was a continuing flaw with this series of tractors. It was the first Ford tractor to have a clutch on the left side and independent brakes on the right, and the wide-spaced front wheel design of the 9N and 2N was retained.
What HP is a Ford 600 tractor?
The “600” and “700” both had around 30 horsepower on the drawbar, with the “600” set up as a utility or plowing tractor and the “700” as a row crop tractor with high ground clearance; the “800” and “900” both had around 40 horsepower, with the “900” as the row crop tractor; the “800” and “900” both had around 40 horsepower, with the “900” as the row crop tractor.
How do the hydraulics on a tractor work?
The hydraulic system in a tractor works by the pumps transferring fluid from the system’s reservoir all the way to the tractor’s hydraulic system, increasing the fluid’s energy level by increasing the pressure, and the tractor’s motor then acts as the pump’s main power source.
What is a tractor rear remote?
Rear remotes are simply auxiliary hydraulic connections that allow you to operate hydraulic cylinders, and they are made up of quick connections located somewhere on the tractor’s back and a control lever held by the operator.