Difference Between 8n Ford Tractor and 9n Ford Tractor (With Table)
The 9N Ford tractor, which used the Ferguson three-point hitch system, was introduced in 1938, and approximately 500,000 8N tractors were sold between 1948 and 1952, demonstrating Henry Ford’s belief that his mass manufacturing skills could be applied to tractor production.
8N Ford Tractor vs 9N Ford Tractor
The 8N and 9N Ford tractors were introduced in 1947 and 1939, respectively, and the 8N was the first tractor to have a clutch on the left side and independent brakes on the right. Ford sold approximately 530,000 tractors worldwide.
Comparison between 8n and 9n Ford tractor
The vehicle has a clutch and a left brake on the left side, as well as a louvred door for air ventilation but no air ventilator. The serial number begins with the letters “8N” on the right side of the engine.
What is 8N Ford Tractor?
The 8N Ford Tractor is a well-known agricultural tractor that was introduced in 1947 and was the first tractor to have a clutch on the left side and independent brakes on the right. It has a 4-speed transmission and a 4-cylinder ‘L head’ engine.
What is 9N Ford Tractor?
The Ferguson was designed to solve some of the issues that plagued previous Fordson tractors, such as overflow when the plough hit a snag. During WWII, the US Navy used 9N for aeroplane towing and dubbed it the “Moto Tug.”
Main Differences Between 8N Ford tractor and the 9N Ford tractorÂ
The 8N transmission speed is 4, while the 9N transmission speed is 3, and the 8N throttle is close to the base of the steering wheel, with a louvered door for air ventilation on 8N Ford tractors but not on 9N Ford tractors.
Conclusion
The 9N Ford tractor is more difficult to repair than the 8NAA or later Ford tractors, which are older and more reliable. Despite being over half a century old, many replacement parts are still available. Overall, the 8Ford tractor is the better option of the two.
What’s the difference between 8N and 9N?
For starters, the 8n tractors have a four-speed transmission, whereas the 9n tractors had a three-speed transmission, giving you more control over your speed and power. The older 9n tractors had foot pegs, whereas the 8n tractors had running boards where you could place your feet.
What does 8N mean on a tractor?
Both brake pedals are on the same side u2013 9N and 2N tractors were split. The 8N introduced position control, which is a small up/down handle under the seat on the right sideu2013this was an improvement to the hydraulic system.
What is the difference between a Ford 8N and a Jubilee?
The Jubilee looks a lot like its predecessor, the Ford 8N, but it has a lot of new and improved features. The Ford 8N’s classic flathead engine was replaced with a powerful overhead valve engine that produced 32 horsepower and 134 cubic inches of displacement, earning it the nickname “The Red Tiger.”
What engine is in a Ford 8N tractor?
The 8N has a four-cylinder, eight-valve engine with 120 cubic inches (ci) of displacement, 3.188 inches of bore and 3.75 inches of stroke, a 6-to-1 or 6.7-to-1 compression ratio, and a 23.22 belt horsepower with a 27.32 maximum, depending on the year.
Is a Ford 8N a good tractor?
The Ford 8N is the gold standard in tractor reliability, built to last for generations. While these tractors do require some maintenance, there are no significant design flaws that would render them unreliable, and they are simple to maintain.
Why did Ford stop making tractors?
From 1939 to 1946, the Ferguson-Sherman company, which made plow and tractor parts, marketed the Model 9N for sales distribution; after the war, all production of the Ford Model 9N tractor was halted, and Harry Ferguson’s relationship with Ford Motor Company ended in 1946.
Does Ford still make tractors?
Ford is still the only major automaker in the country with its own tractor line, despite its annual tractor sales of about $1.3 billion being dwarfed by its nearly $50 billion in automotive sales.
What is a 2N Ford tractor worth?
The 9N and 2N had three-speed transmissions, while the 8N had a four-speed, but the older tractors’ value appears to be unaffected; prices typically range from $1,000 to $3,000, depending on condition.
How much horsepower does a Ford 600 tractor have?
The “600” and “700” both had around 30 horsepower on the drawbar, with the “600” set up as a utility or plowing tractor and the “700” as a row crop tractor with high ground clearance; the “800” and “900” both had around 40 horsepower, with the “900” as the row crop tractor; the “800” and “900” both had around 40 horsepower, with the “900” as the row crop tractor.
How fast does a Ford 8N go?
The u201c8NCREDIBLE,u201d a 1952 Ford 8N tractor, has been named the world’s fastest farm tractor, reaching a speed of 96.3185 miles per hour.
Can a Ford 8N run a tiller?
TILLER: Unless the tractor is equipped with a rare Howard or Everett auxiliary transmission, the ‘N’ tractor will not run a tiller. The ground speed is simply too fast without it. Another option if you REALLY need to use a tiller with an ‘N’ is a tiller with its own engine.
What is a 1948 Ford 8N tractor worth?
A good 8N in my area would cost between $2500 and $3,000.